|
Features of
Silicones
1.
Excellent stability to temperature alteration
Stability over a wide temperature range from -40 to 200
oC.
2.
Good weather
resistance
Prolonged outdoor usage, not easily age, harden, crack, and
flake off.
3.
Good protection from mechanical shock and
vibration.
Cured silicones exhibit excellent elasticity, provide good
protection from mechanical
shock and vibration.
4.
Excellent dielectric
properties
The backbone of silicones contain inorganic silicon, provides
excellent insulation;
therefore, it is very suitable for applications of electronic
products.
Applications of Silicones
1. Adhering and sealing.
2. Waterproof and insulation.
3. Potting, encapsulating, and molding.
4. Heat conductive.
Silicones
| |
P/N |
Color |
Mixing
Rate |
CPS |
Features and
Applications |
|
1-part
RTV |
S-282 |
White |
--- |
Paste |
Fixing and
adhesive bond for general electronic parts
|
|
S-283 |
Black/
Grey/
Red |
--- |
Paste |
Fixing and
adhesive bond for general electronic
parts |
|
S-291 |
White |
--- |
15,000 |
Neutral,
sealing and fixing for general electronic parts
|
|
S-292 |
White/
Grey |
--- |
100,000 |
Neutral, high
viscosity fixing for high-heel electronic
parts |
|
S-293 |
Black |
--- |
15,000 |
Neutral,
UL94HB approved, sealing and fixing for electronic
parts |
|
SR-314C |
Clear |
--- |
10,000 |
Neutral, high
transparency, encapsulating for electronic circuit
board |
|
SR-322 |
Clear/
Black/
White/
Red |
--- |
1,000 |
Neutral,
potting, sealing, and encapsulating for small area
|
|
SR-505 |
Clear/
Black/
White |
--- |
5,000 |
Neutral,
potting, sealing, and encapsulating for small
area |
|
SR-512 |
Clear/
Black/
White/
Red/
Grey |
--- |
12,000 |
Neutral,
sealing, adhering, and encapsulating for low viscosity
required area |
|
SR-535 |
Clear/
Black/
White/
Red/
Grey |
--- |
35,000 |
Neutral,
sealing and adhering for mid-high viscosity required
area |
|
SR-550 |
Clear/
Black/
White |
--- |
55,000 |
Neutral,
sealing and adhering for high viscosity required
area |
|
2-part
RTV |
SC-129 |
Grey |
1:1 |
|
Shore A 55,
potting for high and low temperature resistant
electrical and electronic devices |
|
SC-412 |
Clear |
20:1 |
100 |
Highly
transparent, light transmission > 96%, potting for
transparency required devices |
|
SC-711 |
Clear |
1:1 |
300 |
light
transmission > 94%, potting for transparency required
devices |
|
SC-725 |
Clear |
1:1 |
|
soft
elastomer, protection for tenuous lines |
|
SCN-320 |
White |
20:1 |
2,000 |
Shore A 20,
low viscosity, for ink transfer mass |
|
SX-326 |
Cream
white |
20:1 |
30,000 |
Shore A 65,
moldmaking for high temperature (250 oC)
use |
|
Heat Sink |
SG-226 |
White |
--- |
Paste |
thermal
conductivity: 0.6W/mK |
|
SG-230 |
White |
--- |
Paste |
thermal
conductivity: 1.0W/mK |
  
  
  
Back to Main page
>>
|
